JointCAM on X-Carve

General JointCAM questions and discussion
Post Reply
Lexo_24
Posts: 1
Joined: Mon Dec 31, 2018 8:00 pm

JointCAM on X-Carve

Post by Lexo_24 »

Hello, To anyone who still comes to this forum, I am new to this forum and wanted to know if anyone has successfully made Joint CAM work with an X-Carve CNC from inventables? I'm interested enough to purchase but wanted to know if it is only limited to certain CNC's? Thank You

Alvaradokid
Posts: 2
Joined: Thu Dec 23, 2021 6:46 pm

Re: JointCAM on X-Carve

Post by Alvaradokid »

Hi I like to know if you ever got it figured out up and running on your machine I have a similar machine that uses a very similar post-processor wondering if you got it up if you could share me your configuration settings thank you

G-Force_Admin
Site Admin
Posts: 81
Joined: Tue Sep 23, 2014 5:10 pm

Re: JointCAM on X-Carve

Post by G-Force_Admin »

If you email me at support at g-forcecnc.com, I can help you setup JointCAM to work with an X Carve. I know there are a few X Carve owners using JointCAM, but will have to do a little research to get the correct info.
Gerry

Post Reply