I've been using JointCam for over a Month and it's been very helpful to use. I like that the developer offers continual upgrades, and would like to encourage even more creative design features!
I'm a little slow to catch on, but once I figured out Mortise and Tenons, I was able to make custom storm/screen doors. For the process I even developed a jig to hold stiles for a straight 1 1/2 inch mortise.
JointCam Success!
JointCam Success!
- Attachments
-
- IMG_5403.jpg (123.18 KiB) Viewed 12804 times
-
- IMG_5395.jpg (142.11 KiB) Viewed 12804 times
-
- IMG_5392.jpg (139.33 KiB) Viewed 12804 times
-
- IMG_5398.jpg (119.22 KiB) Viewed 12804 times
-
- IMG_5396.jpg (97.71 KiB) Viewed 12804 times
-
- Site Admin
- Posts: 81
- Joined: Tue Sep 23, 2014 5:10 pm
Re: JointCam Success!
Nice job. First time I've seen anyone using the mortise and tenon feature.
Gerry
-
- Posts: 2
- Joined: Thu Dec 23, 2021 6:46 pm
Re: JointCam Success!
Mr. William that is real nice, I am having an issue sir I pray you'll help me with, I have the 1f also as you do, yet I can not upload gcode generated by Joincam to machine it gives the
error:Expected word or assignment, found NUMBER_TOKEN
I am thinking it is my Config settings in Jointcam here is a screen shoot of them, can you share with me yours, thank you sir...
error:Expected word or assignment, found NUMBER_TOKEN
I am thinking it is my Config settings in Jointcam here is a screen shoot of them, can you share with me yours, thank you sir...
-
- Site Admin
- Posts: 81
- Joined: Tue Sep 23, 2014 5:10 pm
Re: JointCam Success!
This is because you have an invalid number value ent4ered somewhere.error:Expected word or assignment, found NUMBER_TOKEN
Can you post a larger pic, or send it to me at support@g-forcecnc.com.
Feel free to email for support any time.
Gerry