I uploaded a development version with box joint capabilities.
They should be fully functional with one exception. There are options for A, B, and A+B boards to be machined. The A+B option will not output any code.
No manual or docs yet, but it should be self explanatory.
I haven't run any box joint code on a machine, only in simulation mode, but it all appears to be correct.
Test Version 0.9.0.17 - with box joints
-
- Site Admin
- Posts: 81
- Joined: Tue Sep 23, 2014 5:10 pm
-
- Site Admin
- Posts: 81
- Joined: Tue Sep 23, 2014 5:10 pm
Re: Test Version 0.9.0.17 - with box joints
I've updated the manual to include some information on the box joint portion of JointCAM.
http://g-forcecnc.com/downloads/JointCA ... 0V1.03.pdf
http://g-forcecnc.com/downloads/JointCA ... 0V1.03.pdf
Gerry
-
- Posts: 6
- Joined: Fri Oct 03, 2014 6:24 am
- Location: Far North Queensland Australia
Re: Test Version 0.9.0.17 - with box joints
Hi Gerry,
Just updated both the manual and the software.
Cheers
Tony.
Just updated both the manual and the software.
Cheers
Tony.